In the Hoop Candy Bar Cover
In the Hoop
Candy Bar Cover
Supplies:
2 pieces of 8 x 8 fabric (can be the same fabric or coordinating)
8 x 8 piece of batting (warm and natural preferred)
embroidery thread
matching bobbin
lace for trim
tear away stabilizer
Candy Bar Cover Design.jef or Candy Bar Cover Design.pes
Instructions:
Hoop tear away stabilizer in B hoop
Lay fabric right side up with the piece of batting under in middle of hoop.
1. Outline of cover. After stitched take hoop off machine and trim as close to stitching taking care not to cut fabric.
2. Lettering
3. Change bobbin to matching bobbin thread and attach the other piece of fabric right side up to the back of the hoop. Spray with KK2000 to hold in place. Stitch. Trim fabric as you did in step 1.
4. Satin stitch to cover raw edges.
5. Placement for lace. Attach lace on front and back of the hoop lining up with the stitched lines. Spray lines with KK2000 to hold lace in place.
6. Stitching to hold lace in place.
7. Placement for Velcro. Cut a piece of each side the size of the stitched area. Attach one piece on the top (north side) fabric and one on the bottom (back of the hoop). Spray area with KK2000 to hold Velcro in place. (Wonder tape or fabric glue works great.)
8. Stitching to hold Velcro in place.
You’re done!! Enjoy!